So, we checked in with our professional staff here at Jovemaprendiz2019.org this week to help us compile a list of the most common TV problems and how to fix televisions all on your own. And if you look through the list and your TV problem isn’t listed, please give us a call! We’re here to help you figure out what’s wrong and troubleshoot it.
How to fix televisions have Water-Damaged
Step 1: Unplug the television
It may sound obvious, but as soon as you detect that the television has water damage, you must disconnect it immediately. You may also want to move it from where it was originally set if it is simple to do so. This, of course, is dependent on the extent of the water damage. If there is enough for it to leak, the television must be relocated from its existing placement.
Blow Dry the Affected Area in Step 2
You may be able to benefit from merely blow-drying the area where the water damage occurred on the television. It is always a good idea to avoid blowing completely hot air onto the areas. If there is a ‘cool’ button, it is recommended to push it while using the blow dryer or to use it on a lesser setting. If you have a compressor, blowing air at a slightly lower pressure over the damaged region might help to “remove” the moisture from electrical connections, reducing the danger of corrosion and ultimate degradation and further breakdowns down the road.
Step 3 – Have Patience
Most of the time, you’ll want to just wait it out until the water evaporates on its own. Place the television in a place where it will get lots of ventilation and will be able to sit and dry off for a day or two. This is sometimes the only option available to you. Depending on where the damage occurred on the television, you may want to remove the back and let it air dry. After the television has dried for a few days, reassemble it and test it to see if it works.
Step 4 – Hire a Repairman
If none of these options work, you may have to take your television to a repairman’s shop. You must contact them and inform them of the amount of water damage sustained by the television as well as the location of the damage. They may be able to present you with an estimate over the phone, allowing you to evaluate whether the water-damaged television is worth repairing.
5th Step – Replacement
It’s the final step on how to fix televisions. If the worst happens, you may need to buy a new television set. A secondhand one may be a decent option in some cases. Examine many websites that sell secondhand appliances online. Before you buy a television, make sure you ask a lot of questions and examine it properly. This will keep you going until you can get a new one.
Read more:
Common Problems with your TV and how to fix televisions?
The television is showing a blue, green, or black screen
This is a rather typical issue for TV owners but how to fix televisions have these problem? The good news is that the cure is usually relatively straightforward as well. If your TV displays a colored screen instead of what you’re attempting to see, it’s because it’s not receiving a signal. Check that you are on the correct input and that the device you are attempting to access (cable box, Blu-Ray player, game system, etc.) is turned on and connected to the TV. Following that, you should double-check your video connections to and from each device.
If you’ve established that you’re on the correct input, that your device is powered on, and that the wiring between your device and TV is functioning properly, but you still don’t have an image, it could be a problem with your cable or satellite. Try calling them or visiting their website to see if they are currently experiencing an outage in your region.
The Remote Doesn’t Work
There are a few ways you can try to determine whether the problem is with the TV or the remote. First, make sure the remote has new batteries – this is frequently the issue when a remote appears to be damaged.
Once you’ve established that the batteries are in good condition, you can try a simple trick that involves your cell phone: Aim your phone camera at the remote’s end and press a couple buttons. Through the camera, you should be able to see a light turn on. If you do, the problem is with the TV; try switching it to a different power outlet to see if that cures it. If you don’t see the light, it’s because your remote isn’t working properly. Remotes do wear out over time, but you can easily change them by ordering a replacement from the manufacturer online or contacting us to have a bespoke remote programmed for your system.
What’s the point of a personalized remote? The options are unlimited; give us a call and we’ll walk you through the advantages.
My LED, OLED, or QLED screen has lines or cracks
Another typical TV issue is cracks and lines running through the screen. You must determine whether the line is caused by physical damage to the screen or by something else appearing incorrectly.
Try switching inputs; if the crack or line remains, your TV will most certainly need to be replaced. Screen repairs are available, but they can cost nearly as much as a new TV, not to mention the inconvenience of coordinating the repair with a third-party repair provider.
Instead, say goodbye to the old cracked TV and let our TV experts assist you in finding a brand new one to bring home. Call us right away at 609-399-4910, and we’ll help you pick a high-quality TV that will last for years.
My TV isn’t producing any sound
Even the best picture in the world won’t help you if you don’t have sound from your TV! Your first stop should be to double-check all cords, ensuring that your HDMI cable is correctly linked to your TV and your speaker cables are properly attached to your speakers.
Once you’ve established this, it could be as simple as changing a setting — make sure your TV is set to output audio to whatever is connected to it. If it doesn’t work, you could try a different cable or an other device. If the speaker works perfectly for items other than your TV, the problem is with your TV – and vice versa if the internal TV speakers work but the speaker doesn’t.
Everything on my television appears to be incorrect (The Soap Opera Effect)
We hear a lot of complaints about this one, but for some reason, TV manufacturers keep pushing it.
If you’re watching TV or a movie and everything appears to be moving too quickly, or almost as if it’s sped up, this is known as the “soap opera effect.” This is caused by your TV adding extra frames to the content it is presenting in an attempt to smooth things out, but for most people, this results in an image that appears “too genuine” and artificial.
The good news is that this is a simple repair; simply go into your TV’s settings and disable motion smoothing. This option may be hidden in different places of the menu on different TVs, but if you discover it and turn it off, your picture should look more natural… and not like it was filmed on the set of a soap opera.
How to fix televisions that have scratches on screen?
You can’t entirely remove scratches from an LCD TV, but you can hide them for a while. The procedures listed below can help you get the scratches repaired.
Method of Petroleum Jelly
What You’ll Need:
- Water
- Using a clean microfiber cloth
- Jelly made with petroleum
Method: Using water and a cloth, clean the surface. Allow it to dry for a while. Fill the scratches with roughly 1 tsp petroleum jelly. Once all of the scrapes have been filled, take a clean towel and gently wipe away any excess jelly. The scratches will appear lighter, if not completely unnoticeable. If it wears off, you may need to reapply.
Precaution: Do not press too hard when cleaning away the excess jelly, since this may leave some traces of the jelly inside the scratch.
Using a Pencil Eraser
What You’ll Need:
- Using a clean microfiber cloth
- Water
- Eraser
Method: Using water and a clean cloth, thoroughly wipe the scratched area. Allow the area to dry. Now, take a clean pencil eraser and lightly rub over the scratch. It should be rubbed in the direction of the scratch. Continue doing so until the scratch is gone.
Precaution: Use a clean eraser free of pencil graphite, as this will smudge on the screen and make the scratch dirtier.
Method Using Isopropyl Alcohol
What You’ll Need:
Water
- 2 sterile microfiber cloth
- Remedy for cleaning (isopropyl alcohol and water)
First and foremost, make a cleaning solution. Combine 1 part isopropyl (rubbing) alcohol and 20 parts water in a mixing bowl. Now, using a cotton towel dipped in water, clean the scratched area. Allow it to dry. Dip another cloth in the cleaning solution and carefully clean the area around the scratch. Continue scrubbing until the scratch is gone. Now, using a dipped swab in water, clean the alcohol from the screen. The cleaning solution aids in scratch removal by dissolving the anti-glare layer that covers the affected region.
Precaution: If the solution begins to smudge, cease immediately. Do not use a strong alcoholic beverage. The alcohol strength should not be greater than 35%.
Repair Kit for LCD Scratches
LCD scratch repair kits are widely available in the market under various brand names. These kits are designed specifically to remove scratches from any LCD panel. These packages usually include a polishing paste and a microfiber cloth. This kit will come with basic instructions that you may use to repair the scratch.
How to Prevent LCD Screen Scratches
By taking a few basic precautions, you can keep your screen from getting scratched.
To wipe the screen, do not use paper towels, tissue paper, or an old cloth. When cleaning, always use a microfiber cloth because it is gentle on the screen.
Conclusion
All of the methods stated in this Jovemaprendiz2019.org article on how to fix televisions are useful. Don’t forget to follow if you want to see more fantastic posts on intriguing themes.
